How to Fix Error Code 49.4c02 on HP LaserJet P4014, P4015, P4515, P3015 and 4100N?
Is it accurate to say that you are attempting to print from HP Printer, however it neglects to print and you are getting mistake code 49.4C02 on your PC/workstation screen? And afterward you can't get to the menu or print. Is it valid! At that point don't stress over it. This blunder is caused by a couple of various things. Generally it's related with a printer's firmware; implies the processor on the for issue to prematurely end activity The Error Code 49.4c02 may likewise be an aftereffect of numerous reasons, incorporates invalid print orders, degenerate information, or invalid tasks, or possibly it's a driver issue; old or obsolete drivers or it could likewise be a fly direct card trust it or not, or even it could be low quality parallel links, poor associations, or homegrown applications (outsider programming), and Packet Loss or Interference on Network, and so on. All things considered, HP Error Code 49.4c02 is an impermanent, and it could be effectively settled, as is clarified by the HP technical support group. Subsequently, here are the blog will direct you extremely basic strides on How to Fix Error Code 49.4c02 on HP LaserJet P4014, P4015, P4515, P3015 and 4100N ?. Presently you require following the basic advances which are given underneath, keeping in mind the end goal to settle the issue.
Answers for Fix Error Code 49.4c02 on HP LaserJet P4014, P4015, P4515, P3015 and 4100N:-
Arrangement 1:- Check Printer is Configured in Network Correctly
You ought to do to check that the HP Laser-Jet P4014, P4015, P4515, P3015 and 4100 N printer is designed in systems with LAN link associated.
Disengage the LAN link and restart the unit. In the event that the unit comes to "Prepared Mode", at that point attempt and print a "Setup Page" by deciding to the "Menu" catch, pick "Data menu", and after that pick "PRINT CONFIGURATION".
On the off chance that the inner page (Configuration Page) prints fine and after that the issue is just while printing from the system.
In any case, if the inner page (Configuration Page) prints not fine and after that the issue is just while printing from the PC, at that point play out the errand:-
Change the IP of the printer.
Redesign the Firmware when the printer is in "Prepared Mode"
Change the printer driver introduced.
Presently check the blunder is settled, if not, at that point go to the following arrangement.
Arrangement 2:- Check for Old or Outdated Firmware
To begin with, you ought to do to confirm the printer's present firmware by the accompanying way:-
In the first place Way:-
Basically print a "Design Page" from the printer's control board.
The page that prints will contain a line that rundowns the "Firmware Version" or "Firmware Date-code".
Find this date and put the sheet aside.
Visit the "HP" site.
At that point tap on "Support and Drivers".
Enter the model number of your printer and take after on-screen guidelines.
Pick "Cross working framework (Firmware, BIOS, Diagnostics, and so on.). Take a gander at the table of information showed.
There will be a section marked "Current Version". Watch that this date is more up to date than the date recorded on your arrangement page.
In the event that accessible, select the "Simple Firmware Update Utility", if not, at that point chooses the Firmware petition for your working framework.
Tap on the "download" interface.
Take after the guideline incorporated into the README document of the download to introduce.
Arrangement 3:- Clear the print line on a Standalone Window PC
The print line is situated in "Printers and Faxes" or "Printers and Devices" menus that can be gotten to by means of the "Begin" catch.
When you are in the right organizer, so at that point essentially tap on the symbol of your HP LaserJet Printer P4014, P4015, P4515, P3015 or 4100N, and the attempting to print once more. The new window will open demonstrating a rundown of your dynamic occupations. At that point right, tap on each activity to erase.
Arrangement 4:- Old or Outdated Drivers or Switching to PCL 5
PCL 5 is a significantly more steady driver decision and is ideal for most situations that don't require PostScript drivers. We prescribe all clients introduce PCL 5 Drivers.
Visit "HP" site and tap on "Support and Drivers".
Enter the model number of your printer.
Take after on-screen directions to download.
Pick the PCL 5 driver when accessible.
Read the included directions on the download to uninstall your ebb and flow driver and introduce the new driver.
Arrangement 5:- Packet Loss or Interference on Network
Check IT Hardware for free associations of terrible ports. This incorporates fix boards, switches, and switches. If it's not too much trouble take note of this is the arrangement in under 2% all things considered.
Arrangement 6:- Bad Data Cable
Get another USB or Cat5e Cable and after that change it to the current one.
Subsequent to playing out all the above advances, I trust your issue is settled.
In the event that you require additionally help related other HP Printer issues, at that point you can contact with HP specialized help group.
Dial HP Customer Support Phone Number To Get Immediate Online Help:-
HP Printer Support Number 1-800-608-5461 is accessible 24×7 to your assistance, so you can dial this sans toll number whenever from anyplace and immediately interface with our all around experienced and capable HP client bolster group. The very talented professionals will give you the thorough help and dependable answers for understand the HP Printer specialized issues and blunders. Henceforth, connect with specialists now and get the hurried help and answers for settle HP Printer questions.