panorama software,virtual tour software
Alternate Text
Joined: 2002-12-24
Send Msg:
Posts: 2
2002-12-24
#1

Rotate automatically

which parameter in the html-script I have to change to rotate the picture automatically to left or right side after loading?
Thanks and merry christmas 


Alternate Text
Joined: 2002-06-12
Send Msg:
Posts: 2239
2002-12-25
#2

In the main html applet param's you might consider using this:

<PARAM name = auto value = 0.2>

This means that the image rotates 2/10's of a degree each step.  4/10ths or 0.4 is a bit faster.  And a full 1 degree rotates a bit too fast for me. 

Ptviewer Scripter defaults to 0.8  and for visitors 300 - 500 mhz that is a good easy viewing rotation speed.  However, on a P4 2.5gighz machine 0.8 gives the visitor Head/Eye ball rotation Whip Lash.

If you are using the button tool bar you will also need to change the parameters for the < and > buttons.  Here is the sample code for the buttons:

<PARAM name = shotspot0 value = " x323 y230 a343 b250 u'ptviewer:startAutoPan(-0.2,0,1.0)' ">
 <PARAM name = shotspot1 value = " x344 y230 a364 b250 u'ptviewer:startAutoPan(0.2,0,1.0)' ">

 

Hope this helps

Dave


/s/
Dave
Forum Moderator for
EasyPano - Panoweaver
Pano2VR


Visit 360texas.com
Alternate Text
Joined: 2002-12-24
Send Msg:
Posts: 2
2002-12-25
#3

Thanks to Dave,
this was the answer to my problem.
Easypano 3.0 is the best and easiest stitching-software with
best results i know.

manni


Alternate Text
Joined: 2003-01-04
Send Msg:
Posts: 751
2005-03-16
#4

<PARAM name = auto value = 0.2>

I've noticed that depending on your computer (slow or fast processor)

the speed is affected.  while .4 might look ok on an old PII, on the newest P4,

is way fasterrrr.

i'm i right about this or just going crazy.

daves, what speed are u using?


Alternate Text
Joined: 2003-01-04
Send Msg:
Posts: 751
2005-03-16
#5

<PARAM name = auto value = 0.2>

i've noticed that .4 on older p2 machines spins at a good speed. but on the newer p4 machines, is tooooo fast!

what are you guys using?


Alternate Text
Forum Moderator
Joined: 2002-11-23
Send Msg:
Posts: 5438
2005-03-16
#6

Jeez, you can find an old thread!

Check out http://www.fsoft.it/panorama/ptviewer.htm and download and use the latest version of ptviewer.jar

To quote from the website

  • When using autopanning the applet can now rotate at a fixed speed, regardless of the CPU speed.
  • Regards, Smooth


    Alternate Text
    Joined: 2003-01-04
    Send Msg:
    Posts: 751
    2005-03-16
    #7

    "Jeez, you can find an old thread!" lol i woulnt talk if i were you...u've been know to dig them from their graves.

    Thanks smooth!

    Looks like it's what i was looking for. have u used it (2.7)?

    if not what version and what auto value are u using?


    Alternate Text
    Forum Moderator
    Joined: 2002-11-23
    Send Msg:
    Posts: 5438
    2005-03-17
    #8

    Are you kidding? When or what thread have I dug up from grave that was more than 2 years old? Never! you are confused with someone else. LOL

    I set auto rotation at 0.2 and yes I use 2.7L

    Regards, Smooth


    Alternate Text
    Joined: 2003-01-04
    Send Msg:
    Posts: 751
    2005-08-11
    #9

    "I set auto rotation at 0.2 and yes I use 2.7L"

     

    smooth or others, where can i get more info on settting the parameters for 2.7?

    Basically, i wante it to do a full rotation in 20 seconds regardless of the pc processor. I also want the auto left pan or auto right pan buttons to work with the 20 second rule.

    i already visited the link below but didnt find it there. http://www.fsoft.it/panorama/ptviewer.htm 

     

     


    Alternate Text
    Joined: 2003-05-09
    Send Msg:
    Posts: 348
    2005-08-11
    #10

    I also use 0.2

    How do I find out which .jar I have on my site?

    Regards Markus


    Nikon D70s, Sigma 8 mm, 4 to 12 shots, Agnos MrotatorTShort, PTGui, PS CS3, and lots of other software :-)
    Alternate Text
    Joined: 2003-01-14
    Send Msg:
    Posts: 141
    2005-08-11
    #11

    Markus
    "How do I find out which .jar I have on my site?"

    With PTViewer running press the letter 'I' on your keyboard to get the version number.

    VT360 "where can i get more info on settting the parameters for 2.7?"
    The link you used will give you all the info you need for his Fulvios newer versions, http://users2.ev1.net/~wufdog/PT/ptviewerscripting/_ptViewer_Start.htm will give you all the rest.

    Simon