panorama software,virtual tour software
Alternate Text
Joined: 2006-10-27
Send Msg:
Posts: 2
2006-12-29
#1

My first try with Panoweaver

The enclosed is my first pano with panoweaver. I have been doing tours with another software program and camera.

using now Nikon D70 Sigma 8mm fisheye and MrotatorTCP and have adjusted the nadol using Smooths directions.

I my experiments every third photo in a pano seems darker..

Any suggests and/or recommendations will be followed.

Thanks to all for the posts..this is the link for my last try.

www.thekomargroup.com/lanai2.jpg  
Alternate Text
Joined: 2003-01-04
Send Msg:
Posts: 751
2006-12-29
#2

if every third shot is landing right where the sun is, that might be your problem.

as it is throwing your exposure off.

you need to use the same exposure and lock it for all the shots.

1.for the sun, try to cut the sun in have with the edge of your lens on the first shot.

2set your exposure and lock them.

3take the first shot

4then do the rest of the shots.


Alternate Text
Forum Moderator
Joined: 2002-11-23
Send Msg:
Posts: 5438
2006-12-30
#3

Hi Ray,

Having looked at this panorama it is clear that the positioning of the sun is centered to the lens and this is never a good idea. Also the camera needs to be set up in manual mode as to lock the settings to make 100% sure all the images are shot with the exact exposure etc. This also involves manually setting the white balance.

To extract the most from this set up it is recommended that you shoot in RAW mode and learn to process these RAW images to there best advantage. Doing this allows for the reduction in Chromatic Aberration and Vignetting and when done in a batched way assures you that all images are processed the same way. (Unlike allowing the camera to .jpg process them)

Regards, Smooth


Alternate Text
Joined: 2006-06-05
Send Msg:
Posts: 148
2006-12-30
#4
Hello Rkomar,

I had the same problem when i started doing panos with my D50. here is my advice :

1. Shoot your first picture with setting the White Balance to Automatic or another setting that seems suitable to you.

2. Shoot the remaining pictures using the balance of the first picture

This may not be a perfect method, but it allowed me to get rid of this problem.

Any expert opinion about my method welcomed :)

Alexandre
Alexandre G.
MSN: agagnaire@chablinet.com
Nikon D50 - Nikkor 10.5mm - NN3 - Manfrotto055CLB - Panoweaver 4.0 - Tourweaver 2.0