which parameter in the html-script I have to change to rotate the picture automatically to left or right side after loading?
Thanks and merry christmas 

In the main html applet param's you might consider using this:

<PARAM name = auto value = 0.2>

This means that the image rotates 2/10's of a degree each step.  4/10ths or 0.4 is a bit faster.  And a full 1 degree rotates a bit too fast for me. 

Ptviewer Scripter defaults to 0.8  and for visitors 300 - 500 mhz that is a good easy viewing rotation speed.  However, on a P4 2.5gighz machine 0.8 gives the visitor Head/Eye ball rotation Whip Lash.

If you are using the button tool bar you will also need to change the parameters for the < and > buttons.  Here is the sample code for the buttons:

<PARAM name = shotspot0 value = " x323 y230 a343 b250 u'ptviewer:startAutoPan(-0.2,0,1.0)' ">
 <PARAM name = shotspot1 value = " x344 y230 a364 b250 u'ptviewer:startAutoPan(0.2,0,1.0)' ">

Hope this helps

Dave

Thanks to Dave,
this was the answer to my problem.
Easypano 3.0 is the best and easiest stitching-software with
best results i know.

manni

<PARAM name = auto value = 0.2>

I've noticed that depending on your computer (slow or fast processor)

the speed is affected.  while .4 might look ok on an old PII, on the newest P4,

is way fasterrrr.

i'm i right about this or just going crazy.

daves, what speed are u using?

<PARAM name = auto value = 0.2>

i've noticed that .4 on older p2 machines spins at a good speed. but on the newer p4 machines, is tooooo fast!

what are you guys using?

Jeez, you can find an old thread!

Check out http://www.fsoft.it/panorama/ptviewer.htm and download and use the latest version of ptviewer.jar

To quote from the website

Regards, Smooth

"Jeez, you can find an old thread!" lol i woulnt talk if i were you...u've been know to dig them from their graves.

Thanks smooth!

Looks like it's what i was looking for. have u used it (2.7)?

if not what version and what auto value are u using?

Are you kidding? When or what thread have I dug up from grave that was more than 2 years old? Never! you are confused with someone else. LOL

I set auto rotation at 0.2 and yes I use 2.7L

Regards, Smooth

"I set auto rotation at 0.2 and yes I use 2.7L"

smooth or others, where can i get more info on settting the parameters for 2.7?

Basically, i wante it to do a full rotation in 20 seconds regardless of the pc processor. I also want the auto left pan or auto right pan buttons to work with the 20 second rule.

i already visited the link below but didnt find it there. http://www.fsoft.it/panorama/ptviewer.htm 

I also use 0.2

How do I find out which .jar I have on my site?

Regards Markus