Fix: Image Pairs with matching..error

I just did 60 locations for a nursing home company and am using the newest pano 7.2 mac.

Every room that had a heavily patterned carpet would come up witha large number of match point errors. Everything I tried including adding more points did not work. The rooms looked like a picasso painting. All other rooms without busy carpet patterns stitched just fine.

I noticed that when doing the first stitch the software was adding in a large number of matching points - more than normal (over 30 pairs per crossover).

I went through the first stitch and removed ALL match points and manually placed in 5 to 6 pairs per crossover. This solved the problem. They stitched perfectly after that. I will post before and after soon.

---

could you please post the pictures

---

Download and try PTGUI and see if it will help. (Not that I'm against PW) but we have to have Options

I use both depending on the need. I shoot for a company that only does Cylyndrical and I got tired of Lugging 2 sets of gear around so I shoot with the fisheye and can create (2) tours types Spherical & Cylindrical from on set with PTGui it works for that and ....... you can shoot the floor and stitch that in (Youtube tutorial are great)

---

Lee Scott - Nikon D3/D300/D5000 - |shaved Nikkor 10.5 mm| Manfrotto 055XPROB tripod /322RC2 Grip - Mrotator TCS |CS5 | PW7 & TW6.5 Pro
----
To err is human ... to not try is just plain lazy